Paxson 36-5-20 Slitters & Slitting Lines | Michael Meyer
Overview
Type:
Slitters & Slitting Lines
Manufacturer:
Paxson
Model:
36-5-20
Condition:
Used - Good
Stock #:
1092
Status:
For Sale
Description

Complete Line 3- 5" Arbor Slitter Heads w/ Tooling

Specifications
Max Width36"
Max Thickness0.156"

-Pit Coil Car: Paxson 34" Wide "V" Cradle Self-Contained Hydraulics 5 HP AC Motor, 3450 RPM, 230/460 V Overall Size: 75" L x 35" Wide x 71" High -Uncoiler: Paxson S/N: 11234-3 Type: 4 Segment Expanding Mandrel Type Expansion: Hydraulic Wedge Mandrel Diameter: 16" - 20" (406mm - 508mm) Mandrel Face Width: 36" (914mm) AC Motor Threading Drive: 3 HP, 1170 RPM, 230/460 V Self-Contained Hydraulics: 7.5 HP, 1760 RPM, 230/460 V Water Cooled Brake: Eaton Airflex Sliding Base: Passline Height: 44.5" from Floor to center of Mandrel Overall Size: 138" L x 67" W x 68" High -Automatic Edge Guide: Overall Size: 67" L x 27" W x 64" High -Thickness Gauge: Vollmer S/N: 7603/P76/837 Overall Size: 60" L x 14" W x 50" High -Slitter Heads: Paxson No. of Interchangeable Heads: 3 Entry Passline Roll: 6" Dia. x 38" Face Width Entry Side Guides, Manual Adjustment Parallel Arbor Adjustment Arbor Diameter: 5" (127mm) Arbor Width: 37.5" (952.5mm) Drive Motor: 15 HP DC, 2500 RPM, 240 V., 55 Amps, Variable Speed Foote Bros. Reducer: 7.6:1 ratio Overall Size: 162" L x 72" W x 69" High -Exit Passline Rolls: Top Roll: 4.5" Dia. x 44" Face Width Bottom Roll: 3" Dia. x 39" Face Width -Scrap Winder: Paxson Maximum Capacity: 2,500 lbs. (1,134 Kg) Scrap Ball Size: 12" W x 36" O.D. (approx.) Hydraulic Motor Driven Oscillate Wind Manual Scrap Ball Removal Overall Size: 56" L x 37" W x 54" High -Tension Stand: Pad Type (2) Air Cylinders for Pad Pressure Entry Loop Arm Entry Passline Rolls Entry Separator Tooling Bar Exit Passline Roll: 5" Dia. x 44" Face Width w/Tachomotor Overall Size: 70" L x 60" W x 85" High -Recoiler: Paxson S/N: 11234-7 Maximum Coil Weight: 20,000 lbs. (9070 Kg) Drum Expansion: Hydraulic Coil Pushoff: Hydraulic Mandrel Size: Diameter: 16" (406mm) Width: 42" (1066.8mm) Overarm Separator: Air Cylinder Operated Passline: 44" from Floor to center of Drum Drive Motor: 25 HP DC, 400/1600 RPM, 240 V, 8.8 Amps into Falk Gearbox with 9.084:1 ratio Holding Brake: Overall Size: 183" L x 77" W x 75" High -Electrics: Mfg.: Excel Industrial Electronics Date of Electronic Rebuild: 1999 PLC Controls: SSD 590 Digital Drives Allen-Bradley SLC 150 DC Panel: 85" L x 21" W x 89" High AC panel: 61" L x 16" W x 79" High -Main Operators Control Panel: 57" L x 26" W x 50" High -Pedestal for Entry Equipment: 24" L x 24" W x 47" High -(2) Hydraulic Power Units: -Slitter Tooling: Approx. Count 0.500" Wide Wapak Knives: 24 - 8.6875" O.D. 96 - 8.75" O.D. 23 - 9" O.D. 24 - 9.187" O.D. 16 - 9.5" O.D. Keyway Size: 1" x 0.500" Misc. Rubbers:

36" Slitting Line
Slitters & Slitting Lines